DZ-30B中間繼電器
- 產品品牌
- 產品型號 DZ-30B
- 產品描述
DZ-30B中間繼電器,是上海人民電氣有限公司 http://www.mauscontracting.com 為您提供的關于DZ-30B中間繼電器型號,DZ-30B中間繼電器價格,有關DZ-30B中間繼電器的相關資...
1 用途
DZ-30B 系列中間繼電器用于直流操作的各種保護和自動控制線路中,作為輔助繼電器以增加觸點數量和觸點容量。
2 結構和工作原理
繼電器為電磁式動作繼電器。采用JK-1型殼體,將DZY-200機芯裝入殼體中,具有透明的殼罩可以清楚觀察到繼電器的內部結構。外形尺寸及開孔圖見附圖。當電壓加在線圈兩端時,銜鐵向閉合位置運動,此時動合觸點閉合,動斷觸點斷開。斷開電源時,銜鐵在接觸片的壓力作用下,返回到原始狀態,動合觸點斷開,動斷觸點閉合。內部接線圖見圖1。
3 技術要求
3.1 繼電器的額定技術數據及觸點形式
型號 |
觸點形式 |
直流額定電壓(V) |
DZ-31B |
三動合三轉換 |
220,110,48,24,12 |
DZ-32B |
六動合 |
3.2 技術數據
技術數據 |
|
型號 |
DZ-31B DZ-32B |
觸點形式 |
3副動合3副轉換 6副動合 |
額定電壓 |
220V 110V 48V 24V 12V |
動作電壓 |
≤70%Un |
返回電壓 |
≥5%Un |
動作時間 |
額定電壓下≤45ms |
觸點斷開容量 |
直流有感負荷50W 交流電路250VA |
4 調試方法
4.1 觸點間隙,動合觸點不小于1.5mm,動斷觸點不于小1mm。觸點超行程不小于0.3mm。
4.2 調整觸點片的壓力可以改變動作值和返回值。
6.訂貨須知
訂貨時應指明:
a. 繼電器的名稱和型號;
b. 安裝方式:凸出式后接線或凸出式前接線;
c. 額定電壓值;
d. 訂貨數量;
e. 交貨地址。