DZS-10B延時中間繼電器
- 產品品牌
- 產品型號 DZS-10B
- 產品描述
DZS-10B延時中間繼電器,是上海人民電氣有限公司 http://www.mauscontracting.com 為您提供的關于DZS-10B延時中間繼電器型號,DZS-10B延時中間繼電器價格,有關DZS-10...
1 用途
DZS-10B系列中間繼電器用于各種保護和自動控制線路中,以增加保護和控制線路的觸點數量和觸點容量。
DZB-11B、13B為動作延時,DZS-12B、14B為返回延時繼電器
2 結構和工作原理
繼電器為電磁式動作繼電器,采用JK-1型殼體,將DZS-200機芯裝入殼體中,具有透明的殼罩可以清楚觀察到繼電器的內部結構。外形尺寸及開孔圖見附錄,內部接線圖見圖1。
繼電器分為動作延時和返回延時兩種。在繼電器鐵芯上面裝有阻尼環(huán),當線圈通電或斷電時,阻尼環(huán)中感應電流所產生的磁通阻礙主磁通的增加或減少,由此獲得繼電器動作延時或返回延時。
3 技術要求
3.1 繼電器的額定技術數據及觸點形式:
型 號 |
延時方式 |
觸點形式 |
DZS-11B |
動作延時 |
二動合二轉換 |
DZS-12B |
返回延時 |
|
DZS-13B |
動作延時 |
三動合 |
DZS-14B |
返回延時 |
圖1 內部接線圖(正視)
技術數據 |
|
型號 |
DZS-11B DZS-12B DZS-13B DZS-14B DZS-15B DZS-16B |
延時方式 |
動作延時 返回延時 動作延時 返回延時 動作延時 |
觸點形式 |
2副動合2副轉換 2副動合2副轉換3副動合 3副動合 4副動合 3副動合 |
額定電壓 |
220V 110V 48V 24V 12V |
動作值返回值 |
動作值≤70%Un 返回值≥2%Un |
延時 |
動作延時額定電壓下≥0.06s 返回延時通電0.5s后斷電≥0.4s |
觸點斷開容量 |
直流有感負荷50W交流電路250VA |
功耗 |
Un下≤5W |
4 調試方法
4.1 觸點間隙:動合觸點不小于1.5mm,動斷觸點不小于1mm觸點超行程不小于0.3mm。
4.2 調整觸點片壓力和改變隔磁片的厚度,可以改變電壓值和延時時間。
.訂貨須知
訂貨時應指明:
a. 繼電器的名稱和型號;
b. 安裝方式:凸出式后接線或凸出式前接線;
c. 額定電壓值;
d. 訂貨數量;
e. 交貨地址。